Need Help?

Ocean Mist CN24 RBG 1 Disc Fogger / Mister / Humidifier with 9 LED RBG Lights - CN-24RBG

(No reviews yet) Write a Review
  • Single disc fogger, mist maker and humidifier features 9 LEDs - red, blue and green.
  • Includes 10 mode controller.
  • Uses no chemicals to make fog.
  • Included transformer is UL listed, runs on 120 volts and uses 26 watts.
  • Fogger is 1.75" in diameter by 1" tall (1.75" tall including the auto switch)
  • Ceramic Disc Size: 20 mm.
  • Ultrasonic foggers can be used with distilled, tap, well or pond water. See below for details!

$49.85

Earn 100 Points! (Worth $1.00)

SKU:
FOG-OM-053
Adding to cart… The item has been added

The Ocean Mist 1 Disc Fogger/Mister/Humidifier with 9 RBG Lights, model CN-24RBG, is a perfect accent for parties or use it indoors as a small humidifier. The LED lights are red, blue and green. Use the included controller to make this unit produce only fog, only light or both. You also can make it display a single light color or multiple colors that rotate automatically at the speed you choose.

This fogger / mist maker / humidifier requires only shallow water to make mist and even can be used in a tabletop fountain. It must be submersed in the correct water depth (about 0.75 inch above the auto switch's top) and be plugged into an electrical outlet to produce fog.

A transformer also is provided.

The ceramic disc size is 20 mm.

The fogger/mist maker/humidifier has a 2 month warranty.

Water Choices and Maintenance for Ultrasonic Foggers and Misters:

If you use tap, rain, well or pond water, the fogger's sensor for low water level should work properly and shut the fogger off when the water level drops below the recommended level. However, minerals common in these water sources will often corrode the (replaceable) ceramic fogging disc(s) faster, requiring it (the disc) to be replaced more often.

If you use distilled water, your ceramic discs will last longer because of the water quality, but you will need to be very vigilant when checking the water levels so the fogger does not run dry. This is important because when using purified water, the fogger's sensor for low water will not work properly (because it cannot sense the conductivity in the water). The fogger may not sense when to shut the fogger off (to prevent burnout of the ceramic disc) if the water level drops below the recommended level.

Using a fogger float or buoy, is highly recommended as it will keep your fogger at its recommended depth and can greatly increase the longevity of the unit. Floats are especially important if you will be using your fogger with distilled water since the low water sensor of the fogger may not operate properly in this circumstance.

Attenion!Please Note:

Discs do need changed from time to time.  When fog production decreases, a new replacement disc can often solve the problem!

Parts & Accessories
Fogger Floats or Buoys Can be found here.
Replacement Ultrasonic Fogger Discs  Can be found here.

Related Products