Need Help?

Ocean Mist DK3-24 3 Head High Output Fogger / Mist Maker / Mister

(No reviews yet) Write a Review
  • Foggers or mist makers add a mysterious and elegant touch to any water feature.
  • This 3 disc fogger produces a higher output than most other traditional 3 head foggers.
  • Adding a few drops of aromatic oil in an indoor setting produces a beautiful aroma to immediate surroundings.
  • For best results: Disc should have about 1"-2" of water above the membrane.
  • Disc Size: 20 mm.
  • Available Model: No lights.
  • Ultrasonic foggers can be used with distilled, tap, well or pond water. See below for details!
  • It is highly recommended to use a float with your fogger to keep it at the recommended water depth which will increase longevity.

MSRP: $139.99
$119.00
Save $20.99 !

Earn 238 Points! (Worth $2.38)

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 2 or above and get 5% off

This 3 disc fogger features 3 super high output jets and an outdoor transformer. Much higher output than a traditional 3-head fogger!

Simply place on a ledge at the edge of the water, or add a float ring to let it move freely, plug it in and instantly enjoy the effects!

Adding a few drops of aromatic oil in any indoor application produces a beautiful aroma to immediate surroundings, enhancing the mood.  

Ultrasonic technology has eliminated the need for any chemicals, providing a much safer alternative to dry-ice!  Float ring sold separately.

Water Choices and Maintenance for Ultrasonic Foggers and Misters:

If you use tap, rain, well or pond water, the fogger's sensor for low water level should work properly and shut the fogger off when the water level drops below the recommended level. However, minerals common in these water sources will often corrode the (replaceable) ceramic fogging disc(s) faster, requiring it (the disc) to be replaced more often.

If you use distilled water, your ceramic discs will last longer because of the water quality, but you will need to be very vigilant when checking the water levels so the fogger does not run dry. This is important because when using purified water, the fogger's sensor for low water will not work properly (because it cannot sense the conductivity in the water). The fogger may not sense when to shut the fogger off (to prevent burnout of the ceramic disc) if the water level drops below the recommended level.

Using a fogger float or buoy is highly recommended as it will keep your fogger at its recommended depth and can greatly increase the longevity of the unit. Floats are especially important if you will be using your fogger with distilled water since the low water sensor of the fogger may not operate properly in this circumstance.

Available Fogger Floats or Buoys: Can be found here.

Replacement Ultrasonic Fogger Discs: Can be found here.

Similar Products